Fast delivery within 72 Hours

Autel MX 1-Sensor TPMS Rubber Valve Kit Set of 4 Replacement Valve Stems

58,00 د.إ

A set of four rubber press‑in valve stems designed as replacements for Autel MX‑Sensor TPMS units (like the 1‑Sensor).
Made to snap into the sensor head without special tools thanks to Autel’s patented press‑release design, which also allows metal stems to be swapped in if needed.
These are replacement valve stems only (do not include the TPMS sensors themselves)
- Autel Box of 4 Metal Press-in Valve Stems for 1-Sensor – Metal valve stem alternative.
- Autel TPMS Sensors 2 in1 MX-Sensor – Single TPMS sensor with rubber valve stem included.
- Other full sensor kits (4‑packs) if you’re replacing sensors and valve stems at the same time.
  - See options like Autel TPMS Sensors Set of 4, Programmable MX Sensor and Autel TPMS Sensor MX-Sensor 315MHz + 433MHz Dual Frequency.

Our courier will deliver to the specified address

2-3 Days

From $20

DHL courier will deliver to the specified address

2-3 Days

From $40

This is a service part, not a sensor — make sure you already have compatible Autel TPMS sensors (e.g., 1‑Sensor/MX‑Sensor).
Rubber stems are generally easier to install and cheaper, but metal stems are more durable for high use or harsh environments.
Always check seal condition and torque to OE specs when replacing valve stems to avoid leaks.

The Autel 1‑Sensor and other MX‑Sensor TPMS units use a modular valve stem system:
- The main sensor body (radio part) stays the same.
- You can choose rubber or metal valve stems depending on your vehicle and application.
- The valve stems click in and out by hand — no valve‑tool required.
This rubber kit gives you four replacement rubber valve stems so you can service or update the valve seals on existing Autel TPMS sensors.